On the braking device of heavy load handling cart

The connecting part of the braking device and the heavy load handling cart needs to be thickened. The thickness of the original electric flat car panel is 4mm. If the heavy load handling carriage is directly connected to it, the strength cannot meet the requirements, so the electric flat car pad must be thickened to increase the strength. When the upper link of the braking device moves up to the extreme position with the nut, a dead point will occur, which causes the upper link to be unable to separate to the left and right and become stuck when it moves downward again. Therefore, in order to solve this problem, it is necessary to design a convex portion on the upper link so that the upper link can maintain a certain angle with the screw axis at the extreme position to avoid the occurrence of dead spots. The brake device of this heavy load handling transfer cart uses high-quality materials, so there is no need to worry about the danger of car corrosion, but the rotating part of the brake device must be regularly oiled, lubricated and maintained, and only in this way can it be used longer.